Ponte Ballarin

From Venipedia
Jump to: navigation, search
Basic Information
Bridge Code
Zucchetta Number
Canal Crossed
Handicapped Accessible?
Length (m)
Width (m)
Minimum Height (m)
Latitude (°)
Longitude (°)
Private
Crooked Bridge?

Overview of Bridge

The Ponte Ballarin was built primarily using Mattoni e Pietra d'Istria. Since then the bridge was last restored on 01-Jan-95.It crosses the Rio dei Vetrai bridging a gap which is 11.36 meters. The bridge is not a crooked bridge. On the northern side of the bridge is the sestiere of Murano and on the southern side is also Murano.There are 2 ramps. On the north side there are 12 steps, on the south side there are 12 steps. This results in a total of 24 steps. The height of a typical step is 14 meters, the thickness of a step is about 45 centimeters, and the width of a step is about 4.16 meters.The steps are paved with Trachite. The bridge is not handicapped accessible and it does not have an additional railing. The summit is 4.16 meters wide and 4.42 meters in length for a total area of about 18.39 meters. The summit is paved with Trachite. Also, this bridge has 1 arch. The bridge's Piena railing is made of Mattoni e Pietra d'Istria and is about 30.00 meters wide is about 0.83 meters tall. Finally, the bridge protrudes 0 meters to the North and 0 meters to the South.


History

We're sorry, we do not yet have origins for every bridge, please check again in the future for any updates!

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox