Ponte Papadopoli

From Venipedia
Jump to: navigation, search
Basic Information
Bridge Code
Zucchetta Number
Canal Crossed
Handicapped Accessible?
Length (m)
Width (m)
Minimum Height (m)
Latitude (°)
Longitude (°)
Private
Crooked Bridge?

Overview of Bridge

The Ponte Papadopoli was built primarily using Legno. It crosses the Rio Novo bridging a gap which is 20 meters. The bridge is not a crooked bridge. On the northern side of the bridge is the sestiere of Santa Croce and on the southern side is also Santa Croce .There are 2 ramps. On the north side there are 11 steps, on the south side there are 11 steps. This results in a total of 22 steps. The height of a typical step is 11 meters, the thickness of a step is about 150 centimeters, and the width of a step is about 5.04 meters.The steps are paved with Trachite. The bridge is not handicapped accessible and it does not have an additional railing. The summit is 5.04 meters wide and 7.48 meters in length for a total area of about 37.70 meters. The summit is paved with Trachite. Also, this bridge has 1 arch. The bridge's Vuoto Decorato railing is made of Pietra d'Istria and is about 22.00 meters wide is about 1.02 meters tall. Finally, the bridge protrudes 1 meter to the North and 1 meter to the South.


History

We're sorry, we do not yet have origins for every bridge, please check again in the future for any updates!

Location

The bridge is located at the following coordinates:

Latitude: 45.4378524° N

Longitude: 12.3199922° E

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox