Ponte Priuli ai Cavalletti

From Venipedia
Jump to: navigation, search
f28647f1-34f7-f434-e941-04bf0c96e33f-thumb.JPG
Basic Information
Bridge Code
Zucchetta Number
Canal Crossed
Handicapped Accessible?
Length (m)
Width (m)
Minimum Height (m)
Latitude (°)
Longitude (°)
Private
Crooked Bridge?

Overview of Bridge

The Ponte Priuli ai Cavalletti was built primarily using Legno e Metallo. It crosses the Rio de la Crea bridging a gap which is 6.65 meters. The bridge is not a crooked bridge. On the northern side of the bridge is the sestiere of Cannaregio and on the southern side is also Cannaregio .There are 2 ramps. On the north side there are 8 steps, on the south side there are 10 steps. This results in a total of 18 steps. The height of a typical step is 16 meters, the thickness of a step is about 30 centimeters, and the width of a step is about 2.11 meters.The steps are paved with Legno. The bridge is not handicapped accessible and it does not have an additional railing. The summit is 2.13 meters wide and 3.62 meters in length for a total area of about 7.71 meters. The summit is paved with Legno. Also, this bridge has 1 arch. The bridge's Vuoto Geometrico railing is made of Legno and is about 11.00 meters wide is about 0.95 meters tall. Finally, the bridge protrudes 0 meters to the North and 0 meters to the South.

3166f69e-7fcc-abd7-f60a-87b803ca0ca0-small.JPG

History

We're sorry, we do not yet have origins for every bridge, please check again in the future for any updates!

Location

The bridge is located at the following coordinates:

Latitude: 45.4430107° N

Longitude: 12.3200699° E

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox