Ponte Privato (2062-2063)

From Venipedia
Jump to: navigation, search
Basic Information
Bridge Code
Zucchetta Number
Canal Crossed
Handicapped Accessible?
Length (m)
Width (m)
Minimum Height (m)
Latitude (°)
Longitude (°)
Crooked Bridge?

Overview of Bridge

The Ponte Privato (2062-2063) was built primarily using Mattoni, Intonaco e Pietra d'Istria. It crosses the Rio Mocenigo o de la Rioda o de S. Stae bridging a gap which is 3.95 meters. The bridge is not a crooked bridge. On the northern side of the bridge is the sestiere of Santa Croce and on the southern side is also Santa Croce .There are 4 ramps. On the north side there are 2 steps, on the south side there are 5 steps. This results in a total of 7 steps. The height of a typical step is 20 meters, the thickness of a step is about 29 centimeters, and the width of a step is about 1.9 meters.The steps are paved with Pietra d'Istria. The bridge is not handicapped accessible and it does not have an additional railing. The summit is 3.49 meters wide and 2.24 meters in length for a total area of about 7.82 meters. The summit is paved with Asfalto. Also, this bridge has 1 arch. The bridge's Piena railing is made of Mattoni, Intonaco e Pietra d'Istria and is about 24.00 meters wide is about 0.89 meters tall. Finally, the bridge protrudes 0 meters to the North and 0 meters to the South.


We're sorry, we do not yet have origins for every bridge, please check again in the future for any updates!


The bridge is located at the following coordinates:

Latitude: 45.4408645° N

Longitude: 12.330486° E

Personal tools