Ponte S. Agostin
|Minimum Height (m)|
Overview of Bridge
The Ponte S. Agostin was built primarily using Mattoni, Intonaco e Pietra d'Istria. It crosses the Rio de S. Agostin bridging a gap which is 12.81 meters. The bridge is not a crooked bridge. On the northern side of the bridge is the sestiere of San Polo and on the southern side is also San Polo .There are 2 ramps. On the north side there are 11 steps, on the south side there are 10 steps. This results in a total of 21 steps. The height of a typical step is 14 meters, the thickness of a step is about 45 centimeters, and the width of a step is about 1.65 meters.The steps are paved with Trachite. The bridge is not handicapped accessible and it does not have an additional railing. The summit is 4.15 meters wide and 3.85 meters in length for a total area of about 15.98 meters. The summit is paved with Trachite. Also, this bridge has 1 arch. The bridge's Piena railing is made of Mattoni and is about 25.50 meters wide is about 0.90 meters tall. Finally, the bridge protrudes 2.2 meters to the North and 0.7 meters to the South.
We're sorry, we do not yet have origins for every bridge, please check again in the future for any updates!
The bridge is located at the following coordinates:
Latitude: 45.4384917° N
Longitude: 12.3279346° E