Ponte de la Croze
|Minimum Height (m)|
Overview of Bridge
The Ponte de la Croze was built primarily using Pietra d'Istria. It crosses the Rio dei Tolentini e de la Crose bridging a gap which is 10.34 meters. The bridge is not a crooked bridge. On the northern side of the bridge is the sestiere of Santa Croce and on the southern side is also Santa Croce .There are 3 ramps. On the north side there are 16 steps, on the south side there are 14 steps. This results in a total of 30 steps. The height of a typical step is 11 meters, the thickness of a step is about 51 centimeters, and the width of a step is about 1.41 meters.The steps are paved with Asfalto. The bridge is not handicapped accessible and it does not have an additional railing. The summit is 4.81 meters wide and 3.1 meters in length for a total area of about 14.91 meters. The summit is paved with Asfalto. Also, this bridge has 1 arch. The bridge's Vuoto Geometrico railing is made of Metallo e Pietra d'Istria and is about 5.00 meters wide is about 1.00 meters tall. Finally, the bridge protrudes 0 meters to the North and 0 meters to the South.
We're sorry, we do not yet have origins for every bridge, please check again in the future for any updates!
The bridge is located at the following coordinates:
Latitude: 45.4391751° N
Longitude: 12.3209045° E