Ponte de la Toletta

From Venipedia
Jump to: navigation, search
Basic Information
Bridge Code
Zucchetta Number
Canal Crossed
Handicapped Accessible?
Length (m)
Width (m)
Minimum Height (m)
Latitude (°)
Longitude (°)
Crooked Bridge?

Overview of Bridge

The Ponte de la Toletta was built primarily using Mattoni e Pietra d'Istria. It crosses the Rio de la Toletta bridging a gap which is 4.56 meters. The bridge is not a crooked bridge. On the northern side of the bridge is the sestiere of Dorsoduro and on the southern side is also Dorsoduro .There are 2 ramps. On the north side there are 4 steps, on the south side there are 4 steps. This results in a total of 8 steps. The height of a typical step is 13.5 meters, the thickness of a step is about 50 centimeters, and the width of a step is about 1.21 meters.The steps are paved with Asfalto. The bridge is not handicapped accessible and it does not have an additional railing. The summit is 2.05 meters wide and 4.75 meters in length for a total area of about 9.74 meters. The summit is paved with Asfalto. Also, this bridge has 1 arch. The bridge's Vuoto Decorato railing is made of Metallo and is about 4.00 meters wide is about 0.95 meters tall. Finally, the bridge protrudes 0 meters to the North and 0 meters to the South.


The following is any history we have regarding the bridge's origins:

�to SS. Gervasio and Protasio. Tradition that runs so they were saying these roads because once a \toleta ', ie small table, was the office of a bridge to pass the channel.


The bridge is located at the following coordinates:

Latitude: 45.4322082° N

Longitude: 12.3259296° E

Personal tools