Ponte dei Assassini

From Venipedia
Jump to: navigation, search
Basic Information
Bridge Code
Zucchetta Number
Canal Crossed
Handicapped Accessible?
Length (m)
Width (m)
Minimum Height (m)
Latitude (°)
Longitude (°)
Private
Crooked Bridge?

Overview of Bridge

The Ponte dei Assassini was built primarily using Mattoni e Pietra d'Istria. It crosses the Rio dei Assassini bridging a gap which is 6.77 meters. The bridge is not a crooked bridge. On the northern side of the bridge is the sestiere of Burano and on the southern side is also Burano.There are 2 ramps. On the north side there are 8 steps, on the south side there are 8 steps. This results in a total of 16 steps. The height of a typical step is 16 meters, the thickness of a step is about 47 centimeters, and the width of a step is about 2.6 meters.The steps are paved with Trachite. The bridge is not handicapped accessible and it does not have an additional railing. The summit is 2.6 meters wide and 2.1 meters in length for a total area of about 5.46 meters. The summit is paved with Trachite. Also, this bridge has 1 arch. The bridge's Piena railing is made of Mattoni e Pietra d'Istria and is about 30.00 meters wide is about 1.02 meters tall. Finally, the bridge protrudes 0 meters to the North and 0 meters to the South.


History

We're sorry, we do not yet have origins for every bridge, please check again in the future for any updates!

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox