Ponte del Formager

From Venipedia
Jump to: navigation, search
Basic Information
Bridge Code
Zucchetta Number
Canal Crossed
Handicapped Accessible?
Length (m)
Width (m)
Minimum Height (m)
Latitude (°)
Longitude (°)
Private
Crooked Bridge?

Overview of Bridge

The Ponte del Formager was built primarily using Mattoni, Intonaco e Pietra d'Istria. It crosses the Rio de le Toresele bridging a gap which is 8.61 meters. The bridge is not a crooked bridge. On the northern side of the bridge is the sestiere of Dorsoduro and on the southern side is also Dorsoduro .There are 2 ramps. On the north side there are 11 steps, on the south side there are 10 steps. This results in a total of 21 steps. The height of a typical step is 13 meters, the thickness of a step is about 40 centimeters, and the width of a step is about 1.4 meters.The steps are paved with Trachite. The bridge is not handicapped accessible and it does not have an additional railing. The summit is 3.27 meters wide and 2.62 meters in length for a total area of about 8.57 meters. The summit is paved with Trachite. Also, this bridge has 1 arch. The bridge's Vuoto Decorato railing is made of Metallo e Pietra d'Istria and is about 4.00 meters wide is about 0.81 meters tall. Finally, the bridge protrudes 0 meters to the North and 0 meters to the South.


History

We're sorry, we do not yet have origins for every bridge, please check again in the future for any updates!

Location

The bridge is located at the following coordinates:

Latitude: 45.4303552° N

Longitude: 12.3307731° E

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox